What cotton content should bed linen have?

Fibres and composition


Short answer

The label states the fibre composition of the product; “100 % cotton” may only be used if the product is made exclusively of cotton. A manufacturing tolerance of 3 % is permitted between the stated composition and the percentages obtained from analysis.

Piyasaya arz edilen tekstil ürünleri, elyaf kompozisyonlarını belirtecek şekilde etiketlenir veya işaretlenir.

LocationArt. 15(1)
Last checked2026-10-04

Tamamen aynı elyaftan oluşan tekstil ürünleri “%100”, “saf” veya “tamamen” olarak etiketlenebilir ya da işaretlenebilir. Bunlar veya benzer terimler diğer tekstil ürünleri için kullanılamaz.

LocationArt. 8(1)
Last checked2026-10-04

Etiket veya işaretleme üzerinde gösterilen elyafların toplam ağırlığı ile ilgili olarak, 10 uncu madde gereğince sağlanacak elyaf kompozisyonu beyanı ile 19 uncu madde gereğince yürütülen analizden elde edilen yüzdeler arasında %3 oranında üretim ihtiyat payına izin verilir.

LocationArt. 20(3)
Last checked2026-10-04

Only textile products exclusively composed of the same fibre may be labelled or marked as ‘100 %’, ‘pure’ or ‘all’.

LocationArt. 7(1)
Last checked2026-10-04

A manufacturing tolerance of 3 % shall be permitted between the stated fibre composition to be provided in accordance with Article 9 and the percentages obtained from analysis carried out in accordance with Article 19, in relation to the total weight of fibres shown on the label or marking.

LocationArt. 20(3)
Last checked2026-10-04

In the glossary: cotton · labelling

Answers are for information; the binding text is the official source linked.

← All questions